Avdel 07500, Instruction Manual

7

* refers to items included in the Avdel service kit. For complete list see page 11.

To fit collar splitters, first disconnect the air supply to the tool.
Remove the nose assembly, if fitted.
Lubricate the collar splitter cam faces, bearing faces and any moving parts with Moly Lithium Grease.
Screw the cam onto the head piston of base tool.
Tighten the nose retaining nut 11 onto the front of base tool and tighten with a spanner*.

To operate, push the collar splitter hard over the collar and then operate the trigger.

■

■

■

■

■

■

COLLAR
SPLITTER

TOOL

COLLAR SPLITTERS - COMPONENT PART NUMBERS

DESCRIPTION

QTY

ITEM 

Nº

3

/

16

" COLLAR

SPLITTER

07500-06800

1

/

4

" COLLAR

SPLITTER

07500-06900

1

/

4

" MAXLOCK

COLLAR SPLITTER

07500-05900

1

SCREW

07001-00004

07001-00004

07001-00142

2

2

SLEEVE

07210-02012

07210-02012

-

1

3

BLADE PIN

07210-02014

07210-02014

07220-03712

2

4

BLADE PIN SCREW

07210-02015

07210-02015

07220-03713

2

5

BLADE

07210-02016

07210-02104

07500-05901

2

6

SPRING CLIP

07500-08000

07500-08000

07220-04500

1

7

BLADE CARRIER ASSEMBLY

07210-02500

07210-02600

07500-07900

2

8

SPACER PIN

07210-02703

07210-02703

07220-03714

1

9

CAM

07500-06801

07500-06801

07500-05803

1

10

OUTER SLEEVE

07500-06803

07500-06803

-

1

11

NOSE RETAINING NUT

07500-00212

07500-00212

07500-00212

1

12

CIRCLIP

07004-00041

07004-00041

07004-00041

1

13

CAP

07007-00076

07007-00076

07007-00076

1

14

BLADE SPRING

-

-

07220-03706

2

15

INDEPENDANT RETAINING PIN

07005-08003

07005-08003

-

1

16

SLEEVE ADAPTOR

-

-

07500-05802

1