Avdel UK Limited
Pacific House
Tel.: +44 (0) 1707 292000
2 Swiftfields
Fax.: +44 (0) 1707 292199
Watchmead Industrial Estate Mail.: enquiries@infastech.com
Welwyn Garden City
www.avdel-global.com
Hertfordshire AL7 1LY
www.infastech.com
12
e)
Pay attention to the maintenance of electric riveting machines.
Check if the moving parts are functioning flawlessly and do not jam. Check for broken and damaged parts that could influence the operation of the
electric riveting machine.
Repair the damaged parts before using the device. Many accidents with electric riveting machines stem from maintenance failures.
f)
Use the electric riveting machine, accessories, tools etc. according to these instructions.
Take into consideration the working conditions and the type of work. The use of electric riveting machines for tasks other than the intended ones
can lead to dangerous situations.
5. Use and handling of the battery tools
a)
Only recharge the batteries in charging devices approved by the manufacturer.
There is a risk of fire when using a charging device designed for a specific battery type when it is used with other batteries.
b)
In electric riveting machines, only use batteries that have been designed for this type of use.
Using other battery types may lead to fire and injuries.
c)
When not using the battery, keep it away from paper clips, coins, keys, nails, screws and other small metallic object which may cause
the contacts to connect.
If the battery contacts short-circuit, it may lead to burns or fire.
d)
Fluid may emerge from the battery if it is used incorrectly.
Avoid contact with that fluid. In case of accidental contact with the body, rinse the area with water. If the battery fluid comes in contact with the
eyes, additionally call for medical help. Emerging battery fluid can lead to burns and irritation of the skin.
6. Service
A
Only let qualified personnel repair your electric riveting machine and use only original spare parts for that.
This ensures the continuous safety of the electric riveting machine.
7. Security advices for electric riveting machines
•
Hold the electric riveting machine firmly with both hands when working and keep standing steadily. The electric riveting machine can be operated
safer when using both hands.
•
Immediately turn off the electric riveting machine if the electric riveting tool jams.
•
Be prepared for a high reacting torque which causes strong recoil. The tool jams when the electric riveting machine is overloaded.
•
Hold the electric riveting machine tightly.
•
Secure the work-piece that is to be riveted. A work-piece is held more securely by a clamping device or a bench vise than by hand.
•
Make sure that the power switch is turned to the "Off" position before inserting a battery. Holding your fingers close to the power switch when
carrying the electric riveting machine or inserting a battery while is “On” may lead to accidents.
•
Do not open the battery, as this leads to the risk of a short-circuit. Keep the battery away from heat (e.g. permanent sun radiation) and from fire
due to risk of explosion.
•
If the battery is damaged or used in an inappropriate manner, vapors may emerge from it. Get some fresh air and call for medical help in case of
complaints. The vapors can lead to irritation of the respiratory tracts.
•
If the battery is defective, fluid may emerge from it and coat adjacent objects. Check the parts affected, clean them or replace them, if necessary.
•
Use the battery only with your
eRiv
TM
electric riveting machine. This is the only way to prevent dangerous overload of the battery.
Technical specifications
Battery-powered eRiv
TM
electric riveting machine
For processing blind rivets with pole cross-sections of 2.4-5.0 mm, all materials
•
Weight: 1.59 kg (without battery)
•
Stroke: 21 mm
•
Engine: 14.4 V DC motor
•
Installation force: 9000 N
•
CE according to EU regulation No. 2006/42/EG
11
GB
