Avdel UK Limited
Pacific House
Tel.: +44 (0) 1707 292000
2 Swiftfields
Fax.: +44 (0) 1707 292199
Watchmead Industrial Estate Mail.: enquiries@infastech.com
Welwyn Garden City
www.avdel-global.com
Hertfordshire AL7 1LY
www.infastech.com
13
C
A
B
E
F
G
H
Quick-replacement of the rechargeable battery
•
Nominal voltage: 14.4 V
•
Capacity:
o
Li-Ion 1.5 Ah (4 cells)
o
***Li-Ion 3.0 Ah (8 cells)
•
Weight:
o
1.5 Ah: 0.33 kg
o
3.0 Ah: 0.55 kg
Charging device
•
Input voltage: 100-240 V / 50-60 Hz
•
Output voltage: 14,4 V
•
Output current: max. 1.5 A
•
Recharging time:
o
1.5 Ah: <60 minutes
o
3.0 Ah: <120 minutes
•
Weight: 0.41 kg
Operational description
Depicted components
The numbering of the components in the picture refers to the
picture of the electric riveting machine
A)
Nosepiece
B)
Front sleeve
C)
Failure indication
D)
Mandrel collector
E)
Trigger
F)
Riveting area illumination
G)
Battery
H)
Battery locking switch
*** The components depicted or described are not part of the
default scope of delivery. You can find all accessories in our
accessory program.
Charging the battery
Note: The battery is partially charged on delivery.
To guarantee full power of the battery, charge it completely in the charger before first use. Pay attention to the charge indicator on the charging device. The Li-Ion
battery can be recharged at any time without affecting its fatigue life. Interrupting the charging process doesn't damage the battery.
Note: The optimum operating temperature range lies between 0°C (32 °F) and 45°C (113°F).
Please consider the notices for disposal.
Removing the battery
The
battery (G)
is equipped with a
locking mechanism (H)
. As long as the battery remains inside the electric riveting machine it is held in position by a spring. To
remove the battery (G), press the unlocking button (H) and pull the battery from the electric riveting device.
Don't use force.
Putting the device into operation
Insert the battery. Only use original
eRiv
TM
Li-Ion batteries with the voltage depicted on the type label of your electric riveting machine.
The use of other batteries may lead to injuries and risk of fire.
Push the battery (G) from under into the stand of the electric riveting machine, holding the locking button (H) pressed. Push the battery into the stand completely
until it is securely locked.
12
Data on noise and vibrations
•
Noise emission: L
PA
= 78,8 dB
•
Uncertainty: K = 3 dB
•
The noise level during operation can
exceed 80 dB(A)
•
Use ear protectors!
•
Vibrations: <2.5 m/s2
GB
Total weight (including 1x 1.5 Ah battery,
charging device and packaging): 4.5 kg
Configurations with power plugs for worldwide
use are available (CE/ECM/UL/ETL/CB/SAA)
