User guide DMX-66
page 7
Programming of the Andante DMX-66
Restart your PC or your laptop, so the program can be executed properly. Use the supplied connector cable
between your laptop and DMX-66. After starting the program klick with the left mouse button
File
and then
New
Projekt.
The following picture appears.
In the menu bar you find under
File
and
Setup,
details for handling the program. Specify the type of the
device and confirm by pressing OK..
Then appears this window. .
Press with the left mouse bottom
Setup.
Then appears this window. Click
Remote Server
and
then
OK
. Now you are connected with the device.
Note:
If you use a DHPC router connection make sure that the IP number of the router is correct. For this purpose
press the preset bottom twice. Then turn the knob until the IP number appears.
