8
THE ABOVE FIGURE IS THE REAR
VIEW.
1. GND:
Ground Contact.
2.
ALARM OUT (OUTPUT):
This is a
common alarm output trigger.
Connect this to external devices
such as buzzers or lights. Switches
Low (GND) (
5V
0V(Active)
)
3. DISK
FULL
(OUTPUT):
This is a
disk full output trigger. Connect this
to external devices such as buzzers
or lights. Switches Low (GND)
(
5V
0V(Active)
)
4. ALARM
RESET
(INPUT):
This pin
connects to an alarm-clear device
for clearing an alarm.
Use a
Normally Open switch to GND.
(
5V
0V(Active)
)
5. RECORD IN (INPUT):
This pin
connects to a record trigger device
for starting a record. Negative
Trigger. (
5V
0V(Active)
)
6. ALARM4
IN
(INPUT):
This is an
alarm input (for CH 4 ), which can
be programmed in the menu system
to Normally Open or Normally
Closed operation.
7.
ALARM3 IN (INPUT):
same as the
above, for CH 3
8.
ALARM2 IN (INPUT):
same as the
above, for CH 2
9. ALARM1 IN (INPUT):
same as the
above, for CH 1
Summary of Contents for MVDR5000
Page 94: ...93 ...
