G3 Series Wireless ARM Quick Start Manual
7
TDG3ARMQS1-1EN 03/21
Subject to change without notice
www.Emerson.com
3.
Connecting to the Wireless ARM (Computer or Mobile Device)
Once a G3 manifold equipped with a Wireless ARM is powered on; the Wireless ARM will broadcast it’s SSID.
Locate the Wireless ARM broadcast ID
On the computer or mobile device; open available WIFI connections. In this example the SSID is Broadcast as “G3 Numatics
6c5c3c”. Each Wireless ARM Clip’s SSID is unique and comprised of the last 6 digits of the Wireless ARM Clip’s MAC ID.
Select the connection and enter the network security key.
The default network security key is 12345678
Verify the computer/Mobile device is connected to the Wireless ARM Clip.
Default Security Key is
12345678
NOTE!