Page
3
of
8
Chapter 1
–
INTRODUCTION
This manual will address dimensions and the features of the TS-FBS01 turnstile while also
covering the process in which this turnstile is installed.
1.1. Product features
The TS-FBS01 flap barrier turnstiles have the following features:
-
Material: standard 304 stainless steel, with the option of getting 316 stainless
steel, and acrylic flaps.
-
Customized flap etching and color, reader cut-out, or barcode reader insert.
1.2. Product specifications
The TS-FBS01 flap barrier turnstiles have the following characteristics:
-
Power requirements: 110Vac [220Vac], 250W to 500W. The flap barrier turnstiles
are provided with different power supplies, based on country and customer’s
requirements. Check the product label before connecting to any power supply.
-
Driver motor: 24Vdc, max. 40W
-
Output interface: 12Vdc
-
Communication interface: RS485
-
Operating temperature: 14°F to 122°F [-10°C to 50°C]
-
Operating humidity: 20% to 95% RH non-condensing
