Avenview DVI-VIDEOWALL-4X, Manual

www.avenview.com

Avenview

10

Setting

Setting the correct COM port for serial control, and the device number for identification

Connect

Making control serial connected

Disconnect

Making control serial disconnected

Input Resolution

Setting the resolution of input

1.  After 10 seconds, the new setting can be applied to DVI-VIDEOWALL-4X, but the input source and 

Display layout mode will return to default.

2. Please reset input source and Display layout mode

Main Source

Choosing one of the inputs as the main source

Sub Source

Choosing one of the inputs as the sub source

Display Layout Mode

Setting the layout of the main and sub sources in the mixed video

1. Main Full Screen: Only main source is displayed in the mixed video

2. Sub Full Screen: Only sub source is displayed in the mixed video

3. PIP Mode: The main source is displayed as the background, and the sub source is downsized

4. Side by Side: The two inputs are displayed side by side

5. Custom Define PAP: User can adjust the layout of the two inputs source without any limitation

Main and Sub source can be from the same input.