www.avenview.com
Page 10
5.
IR CABlE DEfINITIO
IR Sockets
- IR BlASTER: plug in the IR blaster to the HBT-C6pOE-Sp8 to emit all IR command signals received from the IR Extender
plugged into the Rx (Monitor Side) to control the devices corresponding to the IR signals. Example: Set Top Box or DVD
player (The Source).
- IR EXTENDER: plug in the IR Extender into the (RX) Receiver (Monitor Side) to receive all IR command signals from the
IR remote controls of the corresponding source. Example: Set Top Box or DVD player (IR Remote Control).
- NOTE: Incorrect placement of IR Blaster and IR Extender into the extender may result in the
failure of the IR extenders.
- Please check carefully before plugging in the IR extender to the respective IR sockets.
- It is clearly marked and IR IN: IR EXTENDER /IR OUT: IR BLASTER
- WARRANTY WILL NOT COVER THE DAMAGE.
