www.avenview.com
5
1.6
Before Installation
Put the product in an even and stable location. If the product falls down or drops, it may cause an
injury or malfunction.
Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high
humidity.
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it
may cause a fire.
1.7
Device Description & Layout
This product is composed of a Converter RJ45 to HDMI
FRONT PANEL & REAR PANEL (Transmitter, HDM-C6IP-S)
1. +5V DC:
Connect to 5V DC power supply
3. USB INPUT:
Connect ANY mouse/keyboard
wired/wireless adapter.
2. CAT/6:
Plug in a CAT6 cable that is connected to
your router on the same IP Network
4. 3.5mm Jack:
Stereo audio INPUT connection for
VGA connection.
5. 3.5mm Jack:
Stereo audio OUTPUT connection for
VGA connection.
6. VGA:
Connects to VGA Monitor with a male-male
cable.
7. HDMI OUT:
Connects to a HDMI monitor with a
HDMI male-male cable
Note:
Preferred CAT6 and Gigabit 10/1000 Router to ensure HD1080p resolution without delay in
transmission
Important
Before starting the insulation please ensure that all devices are powered OFF
1
2
4
3
5
6
7