3
2.
INTRODUCTION
The Avenview HDM-XTRM-IP-SET, HDMI H.264 IP stream Encoder/Decoder delivers end-to-end streaming media over IP
networks. The HDM-XTRM-IP-SET is a total architecture based on the TCP/IP protocol family. This device is engineered to
deliver A/V signal over WAN
or LAN
, video extension
-
with the help of matching network equipments
-
can be achieved over
several thousands of km's
- NOTE: The QUALITY and TRANSMISSION of the video signals depends on the characteristics and quality of the UTP cables
and Network Infrastructure . We recommend any Network Switches with 1GB POE IGMP v2.0 support . Tested and configured
on the below models
FEATURES:
• H.264 video decoder;
• Transmits audio and video from ethernet port to HDMI;
• Streams media through LAN or WAN;
• Input Resolutions: From 640x480@60Hz to 1080p@24/25/30/50/60Hz;
• Can be used using the Encoder only with
Avenview PC
decoding software over IP;
• Receive TS data with unicast or multicast method;
• Supports RTSP protocol;
• Output Resolution: From 640x480@60Hz to 1080p@24/25/30/50/60Hz;
• Supports audio format including LPCM or AAC standard;
• Displays can be controlled using RS-232 or CEC;
• Telnet CLI and Web UI supported;
• Supports static IP, DHCP and AutoIP;
• Video Bitrate: 2m~30Mbps;
• AAC Audio Bitrate: 32~240Kbps;
• LPCM Audio Bitrate: 1.6Mbps;
• Supports video timing up to 1920x1080@60Hz and 1920x1200@60Hz;
• Low Latency Mode: 120ms end-to-end latency.
www.avenview.com
