Page|38
www.avenview.com
Linearity Grid Line adjustment can be applied to horizontal lines and vertical lines. The
maximum adjusting points in OSD menu is H=9, V=5. If it is executed through Windows PC
tool, it will have 17 control points in H&V directions.
The control points can move all the lines in the control section with the same distance at the
same time. It can also move the grid line at rectangular direction.
This function can co-work with Warp and Edge Blending function.
Important note: When apply Corner Wall function, all the other geometric alignment function will be
disabled. User can only execute geometry alignment through 8 points of Corner Wall adjustment. 4
corner control points can execute image 4 corner alignment same as [2x2] geometry alignment
function. Edge Blend function will be still available.
Corner Wall alignment allows user to adjust the image at wall corner. It can execute horizontal and
vertical corner alignment. User can select either horizontal or vertical alignment at one time. This
function can co-exist with edge blending function but not warp function. The image position can be
adjusted as below:
4 corner image positions
8.3.6
Corner Wall geometry adjustment
