Page|46
www.avenview.com
➢
[Edge] is to select the edge for edge blend and set overlapped pixel number.
➢
User can execute edge blending at any edge.
➢
Maximum edge blend pixels are H=1920, V=1200.
➢
Color indicating lines will appear when set edge blending pixels.
➢
User needs to adjust the color indicating lines to match together (green to green, red to red).
There is no need to calculate the overlapped pixels.
For 3 projector edge blending as example:
•
To select [Right Edge] for LH projector
•
To select both [Right Edge] & [Left Edge]
for center projector.
•
To select [Left Edge] for RH projector
[Edge Blend] hotkey
10.1
[Edge]: select location and set edge blending value
