Page|52
www.avenview.com
The [Color] function can be applied to individual projector for white balance and color difference
correction through separate RGB Gain and Offset adjustment. It will be helpful to compensate projector
color difference, lamp brightness decay and lamp replacement issue. Through [Color] adjustment, it will
improve the video quality in the background and edge blending result.
Under [Color] menu, user can adjust separate
RGB [Gain] and [Offset] value to change the
color and white balance in each projector.
[Gain] is to change the color slope and will see
significant in brighter color.
[Offset] is to add value in all level of brightness
(0-225). User can see more effect in darker
color.
When apply [Color] adjustment, it will affect
entire color in the projector. Please check with
different video contents and minimize the side
effect.
In edge blending procedures, user needs to adjust the color from projector first. If it is still not enough,
user can use [Color] function to do further adjustment. Please note that, any color adjustment will
reduce the color dynamic range. User needs to check the result with full range color image.
10.5
[Color]: Individual projector white balance and color correction
