Page|57
www.avenview.com
User can use geometry alignment to draw the vertical height to the dimensions you need. The
final image height is 1.5m after geometry alignment.
Optimized content resolution: 3328*800 (This is the ideal resolution for the content and
EDID).
Installation distance: 3m-4.25m (based on through ratio 12-1.7).
The overlap value in video wall setting:
o
Projector LH: select RH edge: +197
o
Projector (Center): LH edge=+98, RH edge=+99 (total 197)
o
Projector RH: LH edge: +197
The final luminance is 819 Lux. It will be enough for inside room environment.
After Excel Spread Sheet calculation, user can understand the final image position for each
projector. Please mark image position by paper adhesive tape on the screen. The positions
should include 4 corners of the image for each projector and horizontal center line of the
screen. Laser level is an ideal tool for marking center line, horizontal and vertical image
positions.
Please install the projector at the best position to cover the required area with minimum
keystone adjustments on both sides.
11.2
Mark image location and install the projectors
