© 2017 Aveo Systems, Inc.
3
Installation Steps
Use Mira Portal to define a Room:
1. Create an account or log in to Mira Portal with your computer:
https://mira.aveosystems.com
.
2. Add a new Organization or select one. The organization is usually the
name of the company where Mira Connect is installed.
3. Add a new Site to the organization or select one. The site is usually a
building or campus location within the organization.
4. Add a new Room to the site or select a room.
Pair Mira Connect to the Room:
5. Connect Mira Connect to a Power-over-Ethernet (PoE) network that has a
route to the equipment and to
https://mira.aveosystems.com
or connect a
PoE injector for power when using a wireless network.
6. Press and hold the power switch on the Mira Connect for three seconds
and then release to power on Mira Connect.
Power Switch
Ethernet Interface
Kensington-style lock slot
7. Select the Application Language.
8. Select the Network: Wired or Wireless. For Wireless Networks, select the
network and enter the password or key, if necessary.
9. If Mira Connect has a valid network route, it will show a pairing code to be
used in Mira Portal to pair to the room.
10. Using Mira Portal, click PAIR in the
Mira Connect panel for the selected
room, then enter the pairing code in
the pop-up window.
11. On Mira Connect, confirm the desired room has been selected in the
Setup Summary and then click Finish.
PAIR
