3
R e a r P a n e l
(4)
(1)
(2)
(3)
(
fig. 1.3
)
Name
Function
(1) Antitheft Slot
Attach a Kensington compatible security lock or antitheft
device.
(2) DC12V port
Connect the power adapter into this port.
(3) RGB INPUT port
Input the signal from a computer or other sources and pass it
through to the RGB OUT port only. Connect this port to the
RGB/VGA output port of a computer.
(4) RGB OUTPUT port
Connect the AVerVision300AFHD to any display device with
RGB cable
L e ft P a n e l
(1)
(7)
(5)
(6)
(4)
(3)
(2)
(
fig. 1.4
)
Name
Function
(1) Mini USB port
Connect to a USB port of a computer with a USB cable and use
AVerVision300AFHD as a USB Camera or transfer the captured
images/videos either from the memory source to computer.
(2) HDMI OUTPUT
Output the video signal from the main system on an LCD monitor
with HDMI interface using HDMI cable.
(3) MIC port
Connect a 3.5mm plug microphone. The built-in mic will be disabled
when an external MIC is connected to this port.
(4) Speaker port
Connect to an amplified speaker.
(5) RS-232/CVBS port
Connect the supplied RS-232/CVBS cable into this port. The RCA
jack outputs the video signal from the camera to a TV or video
equipment. The RS-232 jack is used to connect to computer serial
port or to any control panel or for centralized control if desire.
(6) TV-RGB switch
TV switch to output display video from RS232/CVBS (via RCA
connection), and RGB to RGB and HDMI OUTPUT ports.
(7) SD card slot
Insert the SD card with the label facing up.