20
4. Select a camera from the list. The corresponding fields of IP address will display.
5. To change the IP address of camera, user can select “
DHCP
” or “
Static IP
”.
The DHCP should get the IP address from local dynamic IP sever. The static IP, user can enter the
specific IP address. Click “
Apply
” to apply the setting to the camera. The password is required
(default password is
aver4321
).
6. Click “
Search
” button to re-scan the camera.
7. Double-click on the IP address of camera from the list can connect to camera through the browser.
8. Enter the default password (
aver4321
) to login to Web setup screen.
[Note]
If IP Finder cannot find the camera, please check following:
Please make sure the Ethernet connection of camera is well connected.
The camera and PC (IP Finder) are in the same LAN segment.
