70
Optical Drive Problems
The optical drive does not work -
n
Try rebooting the system.
n
The disk is damaged or files are not readable.
n
After you have inserted a CD-ROM disk, it may take a
moment before you can access its content.
The drive does not read any disks -
n
The CD may not be properly seated in the tray. Make
sure the disk is firmly seated onto the spindle.
n
The disk is damaged or not readable.
The disk cannot be ejected -
n
Normally, it takes a few seconds to eject the disk.
n
If the disk cannot be ejected, it may be mechanically
jammed. Straighten out a paper clip and insert it to a tiny hole
next to the eject button. This should reject the disk tray. If not,
return the unit for repair. Do not forcefully pull on the disk tray.
The DVD+/-RW drive cannot record -
n
Verify that the media you are using is not defective or
blank.
