■
chapter 4 upgrading your computer
Upgrading the System Memory
Many applications will generally run faster when the computer’s dynamic memory capacity is increased. The
computer provides one DDR memory socket, located underneath the System Device Cover. You can increase
the amount of memory by replacing the existing one with a dual inline memory module (commonly known as
DIMM) of a higher capacity. The DIMM can be 128MB, 256MB, 512MB, or 1024MB in capacity. The DIMM is of
type DDR SDRAM, has 200 pins and runs on 2.5V. The DIMM should be PC2100 or PC2700 compliant.
Note:
If your computer comes with Intel P4 FSB800 CPU, you must choose PC2700 compliant DIMM module.
Warning:
Memory upgrade is a delicate process. Please observe the following instructions carefully or have a qualified technician install
it for you. Damages due to mishandling of this procedure are NOT covered by the manufacture’s warranty.
Warning:
Changing memory while your computer is in suspend or power-saving mode may cause permanent damage to the hardware.
Make sure you turn off the power and unplug the AC cord before proceeding with a memory upgrade.
Warning:
You should only use the DIMM module that is approved by the reseller or the manufacturer; otherwise the system may become
unstable.
4-5
Summary of Contents for AV6110-EH1
