AVerMedia
®
Technologies, Inc. Product Guide
2
1. Scope & Product Outline
This document describes the detailed specifications and design parameters of Tegra
TX1/TX2 Carrier Board with Multiple Video Sources Support. AVerMedia internal product
model name is EX713AA and current PCB revision is A. It can operate with NVIDIA Tegra
TX1/TX2 module to build up a high performance embedded system. EX713AA is fully
compliance with RoHS. All components and all production procedures have already
followed current RoHS rule to produce.
2.
Features
Jetson Module Feature List
Applications Processor
Tegra X1 or Tegra X2
Memory
LPDDR4 DRAM & eMMC 5.1
Memory sizes for DDR & eMMC vary depending on module – Check relevant Data Sheet
Network
10/100/1000 BASE-T Ethernet
Connectivity
Jetson TX1/TX2 only: Dual U.FL RF connectors: Connects to 802.11a/b/g/n/ac WLAN/Bluetooth
enabled devices.
Advanced power management
Dynamic voltage and frequency scaling
Multiple clock and power domains
Thermal Transfer Plate & optional Fan/Heatsink
Carrier Board Feature List
Connection to Jetson Module
400-pin (8x50) Board-Board Connector
Storage
Full Size SD Card Slot
SATA Connector (Power & TX/RX)
USB
USB 2.0 Micro B (Host & Device)
USB 3.1 Gen1 Type A (Host only)
Wired Network
Gigabit Ethernet (RJ45 Connector w/LEDs)
PCIe
2 x full-height miniPCIe expandability of connecting AVerMedia frame grabbers
HDMI Type A
2 x HDMI 2.0 output each up to 4096 x 2160 p60
Expansion Header
40-pin (2x20) header
