134
i
The UPS application must meet Windows 2000 or Windows XP system
requirements.
(10) Virtual Keyboard
If the keyboard is not available, you may use the Virtual Keyboard. Just click
to show the
virtual keyboard. For uppercase and lowercase, click
shift
button.
Camera Setting
Select the camera from remote DVR servers to modify settings. In the Camera Setting
windows, click
Update
to save and apply the new settings, click
Exit
to exit without saving,
and click
Default1/ Default2
to revert back to original factory setting.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(1) Camera Icons
Select the camera number you want to adjust the video setting. To select all the cameras,
enable the
ALL
check box. To select more than one camera, Right click on the camera icon.
To select one camera only, Left click on the camera icon. The camera icon turns red when it is
selected.
(2) Enable
Set to enable/disable the selected camera. When there is no video source on the camera, we
suggest disabling it so that the system won’t detect it as video loss error.
(3) Camera
-
Display
Enable/disable to show the video. Even if the video of the selected camera is hidden you can
still record the video and preview it in playback mode.
-
Name
Change the camera name.
-
Description
Add a short comment.
(4) Video Adjustment
Adjust the Brightness, Contrast, Hue and Saturation of the selected camera.
(5) Noise Reduction
Reduce undesirable video signal and improve the quality of the video.
