51
9. When is done, click
OK
to save the setting or Click
Cancel
, to leave without saving the
new setting.
4.12.2
Setup the IP PTZ Camera
1. In the PTZ control panel, click
Setup
.
2. When the PTZ Setup dialog box appears, click
IP PTZ
tab.
3. Select the camera number and check the
Use PTZ
box.
4. In the Connection Settings section, select the
Protocol
where the PTZ camera is
connected and IP Camera Site that IP or URL of IP camera. Then, click
Save
to keep the
settings.
5. Use the IP PTZ control panel and adjust the position of the IP PTZ camera.
6. In
the
Preset Setting
section, select the preset number to assign a number for the IP PTZ
camera current position. Set the
DwellTime
(1-60 sec) for how long the IP PTZ camera
stays in that position before it moves to the next one. If you want to add description, check
the
Show Preset Name
box and in the
Preset Name
text box, type the word. When done,
click
Save
to keep the settings.
7. Repeat step 4 & 5, if you want to save another PTZ camera position.
