69
In Camera Setting interface, click
Detail
to configure
Video
,
Senor
,
Relay
, and
Direct
Link by IE
of the IP camera.
Video Setup
Adjust the video setting of the selected camera. Click
Video Setting
to enter video
adjustment interface.
-
Video Setting
Adjust the Frame Rate, Quality, Bright, Contrast, Hue, and Saturation.
-
Recording Setting
Save Original Format:
Save the video that is compressed by IP camera’s
compress mode.
9
Only decode key frame for Preview:
When selected the
Save Original
Format
selection, user can mark
Only decode key frame for Preview
this option. When previewing video, DVR system only shows key frame
and one frame per second.
Transcode by MPEG4 Encoder:
Decoding the video and compress video
again by using MPEG4 encoder.
Sensor Setting
To setup sensor that is embedded on the camera.
1. Click the drop-down list and select the sensor ID number.
2. Enter sensor name in
Name
column
3. The system automatically detects the camera and input relates information. In the
Content section, enter sensor description.
4. In the test section, click
Test
to check the sensor status. Red is high and Green is
low.
5. Click
OK
to exit and accept the setting and
Cancel
to exit without saving the
setting.
