82
5.8 Relay
Setting
The I/O device must be installed to use this function.
To set the Relay Setting:
1. Click the drop-down list and select the relay ID number.
2. Enter relay name.
3. The system automatically detects the card and input
number. In the Content section, enter relay description.
4. In the test section, click
Test
to trigger relay. Red is
high and Green is low.
5. Click
OK
to exit and accept the setting and
Cancel
to
exit without saving the setting.
5.9 Alarm
Setting
In the Alarm Setting dialog box, click
Add
to insert and set new alarm setting, click
Delete
to
remove the selected alarm setting, click
OK
to exit and save the setting,
Cancel
to exit without
saving, and
Default
to revert back to original factory setting.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
To set the Alarm Setting:
