143
the system will capture the image and send the image to the certain e-mail
address with the alarm message.
(4) Modem Dial up Setting
User may set the time to disconnect automatically, just enable the
Auto
Disconnect after
check box and set time.
(1)
(2)
(3)
(4)
To Setup FTP Setting:
1.
Beside the File Transmission via FTP check box,
click
Detail
.
2.
In the FTP Setting dialog box, enter the FTP IP, port,
user ID and password.
3. Click
OK
to exit and save the setting and
Cancel
to
exit without saving the setting.
To Setup Alarm Recording Setting:
1.
Beside the Start Recording check box, click
Detail
.
2.
In the Alarm Recording Setting dialog box,
select the camera to enable/disable video
recording. Enable
All
to select all cameras.
3.
In the Frame Rate selection, select
As Setting
to record the number of frames based on the
Recording Setting or
Max
to record the
maximum of frames based on the available speed.
4.
In the Stop Recording after text box, set the number in second for the program to
continue recording after the alarm has ended.
5. Click
OK
to accept the new settings and
Cancel
to exit without saving.
To Setup Alarm SOP:
Beside the Alarm SOP check box, click
Detail
. In the step text boxes, type the standard
protocol when the alarm is activated. When the alarm is activated, the Standard
Operation Procedure dialog box will appear. Just click
Next
to see the next instruction,
