82
7.3.1 To Setup Remote Console Setting
Click
OK
to exit and save the setting and
Cancel
to exit without saving the setting.
(1)
(2)
(3)
(4)
(1) Storage Path
Set the directory on where to save the data. When there is not enough free space to record one hour data,
the system automatically replaces the oldest data. In case you have more than one storage path, the system
automatically saves the data to the next storage path.
By default the data is stored in C:\RemoteData, to insert another storage path, click
Add
. To remove the
selected path, click
Delete
.
If you want the system to automatically erase the data after a certain days, enable the
Delete recorded data
after
check box and enter the numbers of days in
Days
text box.
(2) Language
Customize the system to display the tool tips and dialogs based on the selected language. By default the
language is in English.
(3) Remote Server
Enter the DVR Server IP and Port number.
(4) Channel Settings
The numbers from 01 to 16 represent the camera ID. In Transmitting Channels section, enable the camera
number to receive the camera signal from the server. In Visible Channels section, enable the camera
number to view the camera signal on Remote Console screen. To select all the cameras, enable the
ALL
check box.
