33023AA
39
Video Loss:
this is available for video servers only. When analog video
is lost it will trigger an event.
Switch to Night Mode:
when the camera changes between day and
night modes, an event can be triggered.
Device Boot or Reboot:
an event can be triggered when the camera
boots or reboots.
Storage:
if storage space runs out or if writing to storage fails, or if the
microSD card is suddenly removed from the camera.
To configure triggers:
1. Use the drop-down menu to choose a
Triggered by
category.
2. If needed, choose a
Region
.
3. Designate a
response
to the event.
You can set any event rule as a manual event. The manual event will
display in the live screen as the Trigger button, which can be clicked to
trigger an event and response.
To set a manual event:
1. Us the drop-down menu to select an
Event Rule
.
2. Click
Apply
.
