ZM201 Indicator User Instructions
57
8.4 Checkweighing application supervisor menu
Reset
Check
Under divisions
Over divisions
Reset
9.
Press
UNITS
…
rESEt
is displayed. Use this to reset the all the checkweigher variables
to the factory defaults.
10.
Press
SELECT
…
no
is displayed.
11.
Press
ZERO
to abort the reset or press
UNITS
…
YES
is displayed.
12.
Press
ZERO
to reset the settings to factory defaults …
rESEt
is displayed.
13.
Press
TARE
…
chEcK
is displayed.
14.
Press
UNITS
…
bAttErY
is displayed. The battery menu is identical in all the
applications. Refer to step
1
on page
47
for information on setting up the
battery.
15.
This completes the Supervisor menu for the Checkweighing application.
Repeatedly press
TARE
until the indicator returns to normal weighing mode.
The current weight value is displayed.