ZM305 GTN Inbound-Outbound User Instructions
17
3.1 General weighing
Using Preset Tare
Preset tares are available if entered in a password protected menu by a supervisor.
There can be up to 10 tares numbered 1-10. To perform a net weighment using one of
the preset tares, follow these steps:
1.
With no weight on the scale, if the display does not read
0
press
ZERO
…
0
is displayed and the
center-of-zero
annunciator lights.
2.
Press
TARE
…
Tare number entry screen appears.
3.
Key in the preset tare number and press
ZERO
…
Tare weight is displayed as a negative value and the
NET
annunciator
lights.
4.
Place container or box and material to be weighed on the scale …
Net weight of material is displayed.
5.
Repeat step
4
until you are finished using that tare weight.
6.
To clear a tare value, press and hold
TARE
until …
cLEArEd
is displayed.
Tare is removed automatically if Auto Tare Clear is enabled.
If the active unit of measure is lb-oz then tare weights must be entered in the oz
equivalent. To enter 2 lb 4.5 oz you would need to enter 36.5 oz (2 lb = 32 oz plus the
4.5)
