ZM305 GTN Inbound-Outbound User Instructions
19
3.2 Truck inbound-outbound operations
Outbound transaction (2nd weighment)
2.
When the truck is on the scale and weight is stable press
to update
totals for this Truck ID and print the Outbound transaction. Below is an
example of an Outbound ticket:
3.
If the Truck I/O transaction is no longer required, press and hold the
IN/OUT
key until
io cLr
is displayed to exit from the Truck I/O mode. The
key
can again be used for General weighing operation.
3.2.2 FLEET key operation
Until a Fleet Truck ID is entered the
key can be used for General weighing
transactions using the configured protocols. Once a Fleet Truck ID is entered the
key will be associated with a Fleet Ticket transaction.
1.
Press the
FLEET
key to perform transactions for Fleet trucks that have an
assigned tare weight.
FLEEtId
is briefly displayed followed by the last active truck ID (last digit
is flashing)
2.
Press
ZERO
to accept the displayed ID …
OR
Use the numeric keypad to enter a different Fleet ID. Press
ZERO
to accept …
When entering the Fleet ID:
l
If the ID exists as a valid Fleet Truck the display will show
FLEEt
momentarily and the
PT
(preset tare) annunciator lights as the stored
Fleet Truck Tare weight is loaded into the active Tare. If no truck is on
the scale the stored Tare will be displayed as a negative weight.
l
If an entered Fleet ID does not exist, the display will show
not Fnd
momentarily. Fleet IDs must be entered in the Supervisor menu
before they can be used.
l
If the entered ID is associated with a Truck I/O record the display will
show
cAnt
and
io id
briefly and then return to the weigh screen.
In Date 07-21-2014
In Time 1:21 PM
Out Date 07-21-2014
Out Time 2:55 PM
Truck ID 123
Transaction 1
Gross 47820 lb
Tare 18580 lb
Net 29240 lb
