44
ZM305 GTN Inbound-Outbound User Instructions
Supervisor menu
Setpoint
Edit
26.
Press
UNITS
…
is displayed. Use this to print the settings under
SEtPnt
.
27.
Press
SELECT
…
Port 1
is displayed.
28.
Press
IN/OUT
to abort the print process or press
UNITS
to scroll to the desired
port and press
ZERO
to print the information …
is displayed after either action.
Reset
Setpoint
Edit
Reset
29.
Press
UNITS
…
rESEt
is displayed. Use this to reset the settings under
Edit
to factory
defaults.
30.
Press
SELECT
…
no
is displayed.
31.
Press
ZERO
to abort the reset or press
UNITS
…
YES
is displayed.
32.
Press
ZERO
to reset the settings to factory defaults …
rESEt
is displayed.
33.
Press
TARE
…
SEtPnt
is displayed.
7.2 Tare
Super
Setpoint
Tare
If Preset Tare is not enabled in a separate password protected menu, skip to step
7
.
If it is enabled continue to the next step.
1.
Press
UNITS
…
tArE
is displayed.
Use this to:
l
set values for up to 10 preset tares
l
print the values of the preset tares
l
reset all preset tares to factory defaults of 0
The following steps describe the procedures.