4. MAINTENANCE (continued)
REPLACING THE LED LIGHT BULBS
Cut the power supply by turning the hood off. Wait for the LED lamps to cool. To prevent damage or to avoid
reducing the life of the new bulb, do not touch the bulb with your bare fingers. Replace the bulb by
manipulating with a tissue paper or cotton gloves.
If the new lights do not work, ensure that each lamp is properly inserted into its socket before requesting the
intervention of a service agent.
CAUTION: LED lamps can only be replaced with a new LED lamp. The lamp rating must be equal to the one
already used. Make sure all the control switches are off and the hood is unplugged or that the breaker is
OFF.
STEPS:
•
This range hood uses LED light fixture: 3W Max 12V LED
•
Make sure the range hood is unplugged or turn OFF the breaker. Make sure the lights are cool to touch.
•
Place a flat-head screwdriver between the light housing and the hood body, gently pry up the light
housing and search for the metal clip.
•
Apply force to the metal clip and pull out the light fixture. Disconnect the power cable and discard the
used light fixture.
•
Reverse the steps to install a new LED light fixture. Turn the breaker or hood ON to test for operation.
5.
SERVICE AND WARRANTY
We warrant our hood under ordinary residential use for one (1) year against defects in materials and
workmanship from the date of its original purchase. This limited warranty applies to any in-house repair
and/or replacement parts.
This limited warranty is not subject to improper installation, accident, misuse, neglect, fire, or other external
causes such as alteration, repair by unqualified personnel or commercial use.
To contact our After Sales/Service Department, Monday through Friday, 8:30 am to 4:30 pm (EST):
AGI SERVICE
Tel: 450.963.1303 / Toll free: 1.888.651.2534
Fax: 450.963.1416
Web/E-mail:
www.agiservice.ca/customer@agintl.qc.ca
27
Light
Flat-head
Screwdriver
Hood
Metal
Clip
Power
Plug
