OPERATING THE HOOD (continued)
Controls
(continued)
:
•
Adjusting the timer function:
•
While the blower is not running, press and hold
Decrease
(-) button over 3 seconds to
enter timer mode. Adjust to desired period of delay off timer by pressing
Increase
(+)
or
Decrease
(-) button (from a minimum of 1 minute to a maximum of 15 minutes). This
setting will be saved immediately.
•
Activating the timer function:
•
While the blower is running, press and hold
Power
button for over 3 seconds to activate
delay off timer.
Power-off delay
indicator will lit up and
Power-off delay digital timer
will
begin to countdown, when it reaches zero, the blower will shut down.
•
Adjusting the light:
•
Press
Light
button once to turn on the lights and once again to turn off the lights.
•
While the lights are off, press and hold
Light
button for over 3 seconds to adjust the
lights to desired intensity. Level of brightness will be stored in the
system’s memory.
CAUTION
: DO NOT touch the lights until they are switched OFF and cooled.
NOTE
:
Light settings are independent from other settings (including power-off delay) and lights have to be
manually turned on or off.
NOTE
:
The system saves user configurations. Settings such as light, timer and blower speed will remain the same
the next time it is turned on.
28
