INSTALLING THE UNIT
Step 1
: Mark the leveling point of the hood. Position two mounting
screws on the wall, leaving 1/8" off the wall.
Step 2
:
Measure the width of the chimney then attach the chimney
mounting brackets to the wall at the desired height, taking
into account the minimum clearance between the hood
and the cooking surface (see installation drawing on page
20
).
Step 3:
Align hood-mounting holes to the screws on the wall and
hook the hood into place. Tighten screws to secure hood to
the wall.
CAUTION
: Make certain the range hood is secure
before releasing
!
Step 4:
Slide a 6" round metal venting tube over
the adapter / plug (see Figures 3a or 3b).
Seal the joints with metal tape
.
Step 5
: Plug the power cord into the socket (see Figure 4).
Fig. 4
Fig. 3a
22
Figure 1
Fig. 3b
