OPERATING THE HOOD (
continued
)
Controls (continued)
:
•
Adjusting the timer function:
•
While the blower is not running, press and hold
Decrease
(-) button over 3 seconds to enter
timer mode. Adjust to desired time by pressing the
Increase
(+) or the
Decrease
(-) button
(for minimum of 1 minute to a maximum of 15 minutes). This setting will be saved
immediately.
•
Activating the timer function:
•
While the blower is running, press and hold the
Power
button for over 3 seconds to activate
Power-off
Delay Digital Timer
. The
Power-off Delay
indicator will light up and
Power-off
Delay Digital Timer
will begin to countdown; when it reaches zero, the blower will shut down.
•
Adjusting the light:
•
Press
Light
button once to turn lights on and once again to turn lights off.
•
While the lights are off, press and hold
Light
button for over 3 seconds to adjust the intensity
of the lights. The level of brightness will be stored in system’s memory.
CAUTION
: DO NOT touch the lights until switched OFF and cooled.
NOTE
:
Light settings are independent from other settings (including power-off delay) and lights have to be
manually turned on or off.
NOTE
:
The system saves user configurations. Settings such as light, timer and blower speed will remain the same
the next time it is turned on.
25
