1
EZ-TOUCH-M Revision 4
1 GETTING STARTED
The table, below provides an overall description of the topics covered within this manual.
Getting Started
Provides Manual Organization, and lists what you need
to get started, hardware and software. Discusses how
to get help with questions or problems you might
encounter through Onscreen Help and Technical
Support.
Models, Features,
and Accessories
2
1
Provides you with a table listing the various models,
their part numbers and special features. Lists the
important features of all EZTouch Panels. Lists the
PLCs supported by the panels, by brand, model and
protocol. Lists the replacement and optional equipment
available, including memory cards, PLC cables and
programming cable.
3
Specifications
Specifications for each model provide detailed informa-
tion. Included are display size, brightness and pixels;
CPU type; service power requirements; operating and
storage temperatures; available memory; serial
communications specs; dimensions, weight, etc.
Installation
4
Shows the mounting and cutout dimensions for the
panel models. Tells you how to connect the unit to
power supply, programming computer, printer, and a
PLC. Special option card connector instructions are also
provided.Shows the setup screens displayed after initial
powerup of the panel. Describes each setup screen and
how to use it to set up your panel.
Provides instructions on battery replacement, gasket
replacement, memory upgrade (FLASH and RAM),
Fuse Reset, and fluorescent backlight replacement.
Discusses precautions and cleaning necessary to
ensure longevity of the panel.
5
Maintenance
6
Troubleshooting
Aids in diagnosing problems you might encounter when
installing or operating your EZTouch Panel. Provides
steps to take to isolate and correct problems.
Chapters
Manual Organization
Appendix A
PLC Cable Wiring Diagrams are provided.
A
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
