DOOR REVERSAL
To reverse the door from right swing to left swing:
IMPORTANT: BEFORE YOU BEGIN, MAKE SURE THE WINE COOLER IS UNPLUGGED AND WE RECOMMENDED AT
LEAST TWO PEOPLE TO EXECUTE THE STEPS BELOW.
1
. Remove the two screws from the front vent with a Phillips screwdriver. Then, remove the front vent cover. This
will expose the bottom hinge.
2. Use your thumb to press down on the stainless steel screw in the middle of door top, and turn it
counterclockwise to unscrew it. Set aside this screw.
3. Remove the cover from the upper right hinge to expose the three upper hinge screws. While holding the door
with your left hand, use a Phillips screwdriver to remove the three screws.
Important: Be sure to safely set aside the hinge, hinge cover and screws as they will be used later.
4. Firmly grasp the door with both hands and lift it up out of the lower hinge. Place the door on padded surface to
prevent damage or scratches.
5. There are two bushings in the upper hinge hole of the door, one large and one small, and only one large
bushing in the lower hinge hole of the door. Remove the three bushings and reinsert them. The one large and one
small bushing from the top are now located on the original bottom of the door. Insert the large bushing from the
lower hinge hole and place it in the original upper hinge hole.
6. Unscrew the lower hinge screws of the unit (located above the front right leveling leg) with a 10mm socket
wrench, and remove the hinge and rubber washer. Save the washer for the next step.
7. Install the spare lower hinge that was included in your manual bag to the cabinet above the front left leveling
leg with a socket wrench. Add the rubber washer saved from the previous step.
TAKE THE DOOR DOWN
UNSCREW UPPER DOOR HINGE AND HINGE COVER
REMOVE DOOR AXIS
INSTALL THE LOWER DOOR AXIS ON THE LEFT LOWER DOOR HINGE, THEN TURN OVER THE GLASS DOOR 180°.
MOUNT THE DOOR ON THE LEFT LOWER DOOR HINGE.
POSITION THE UPPER DOOR HINGE AND HINGE COVER (WHICH YOU TOOK DOWN EARLIER) ON THE LEFT
MOUNTING HOLES.
