background image

AVG-HD120

 

 

SAFETY OPERATION GUIDE 

 

 

 

 

 

 
In order to guarantee the reliable operation of the equipment and safety of the 
user, please abide by the following procedures during installation, use and 
maintenance: 

1.

  The system must be earthed properly. Please do not use two blade plugs 

and ensure the AC power supply ranges from 100v to 240v and from 50Hz 
to 60Hz. 

2.

  Do not install the units in an environment where they will be exposed to 

extreme hot or cold temperatures. 

3.

  These units will generate heat during operation, please ensure that you allow 

adequate ventilation to ensure reliable operation. 

4.

  Please disconnect the units from mains power if they will be left unused for a 

long time. 

5.

  Please DO NOT try to open the casing of the equipment, DO NOT attempt to 

repair the unit. Opening the unit will void the warranty. There are high 
voltage components in the unit and attempting to repair the unit could result 
in serious injury. 

6.

  Do not allow the unit to come into contact with any liquid as that could result 

in personal injury and product failure. 

 

Summary of Contents for AVG-HD120














Reviews: