UDA2-V2
1. Introduction
1.1 Brief Introduction
The UDA2-V2 HDMI 2.0 1x2 Splitter, which can distribute one HDMI input to two
outputs. The splitter supports HDMI video resolutions up to 4K@60Hz 4:4:4, 1080P
3D, and multichannel audio formats. Besides passing EDID information from the
display, there are multiple built-in EDID settings can be selected by the 4-pin DIP
switch on the front panel. The splitter supports convenient firmware updates through
the Micro-USB port.
1.2 Features
▪
Supports HDMI 2.0 and video resolutions up to 4K@60Hz 4:4:4.
▪
HDMI input supports HDCP 2.2 and the outputs support HDCP Active or
HDCP Passive mode.
▪
Supports video resolution down-scaling, the 4K input can be automatically
downscaled to 1080P output for compatibility with 1080P display.
▪
18Gbps high bandwidth.
▪
Advanced EDID management: multiple built-in EDID settings can be selected.
▪
Built-in equalizer for signal enhancement to avoid signal attenuation in
transmission.
▪
Supports CEC pass-through.
▪
Provides LEDs to indicate the current operating status.
▪
Firmware upgrade by Micro-USB port.
