Avid Power ACIW124, Operator'S Manual

13

LED Worklight

To aid use in confined and inadequately lit spaces the LED worklight automatically 
illuminates when the trigger is activated.

Variable Torque Selector

Output force can be varied by pressing the selector button to a desired level, this helps 
to limit the output torque.

Operation

Proper fastening torque is determined by the kind of fastening, the size of the fastening 
or the material or workpiece.

„

It is advisable to perform a test operation to determine the proper fastening time for 
the fastening you are using.

„

Hold the wrench in straight alignment to the fastening.

„

Depress the wrench and use it in the required amount of time.

„

After fastening, always check the torque with an appropriate torque wrench.

Note:

„

Do not use this tool to install wheel nuts without a torque limiting device. Doing so 
could result in galled or broken nuts.

„

Using a universal joint or extension bar may reduce the fastening force of the impact 
wrench and require longer fastening time.

„

Using an impact wrench creates heat. The metal housing at the front of the wrench 
will become hot. Under certain circumstances, the force required to tighten or remove 
fixings may cause the fixings themselves to become very hot! Wear suitable gloves to 
prevent burns.

BASIC IMPACT WRENCH OPERATION