background image

7

proceeding with the charging operation.

 

„

Set up the charger and cable in a safe place when it won't be knocked, tripped over, 
stepped on, etc. and when it is ventilated. Make sure the ventilation slots in the 
charger are not obstructed, plug the charger into the socket outlet.

Battery packs

 

„

Before charging, read the instructions.

 

„

For indoor use. Do not expose to rain.

 

„

Do not charge any other manufacturer's battery packs using the chargers. Any other 
application is considered misuse.

 

„

The battery must be removed from the application before it is recycled.

 

„

The charger must be disconnected from the supply mains when removing the battery.

 

„

Do not use any other than the designated batteries/chargers with this product.

 

„

Do not crush, open or burn the battery. Exposure to potentially harmful materials may 
occur.

 

„

Do not expose to high temperatures over 45°C. The battery may degrade at high 
temperatures.

 

„

Charge battery in conditions between 5 to 30°C with the specified charger designed 
for this battery.

 

„

Do not use battery if it has been stored at 5°C or less. Allow it to normalize at room 
temperature before usage/changing.

Warning!

 

„

Leaking battery packs.

 

„

The electrolyte in battery packs is corrosive. Avoid contact with the skin.

Connection to the Power Supply

 

„

Make sure the power supply information on the charger's rating plate is compatible 
with the power supply you intend to connect.

 

„

If an extension lead is required, use an approved and compatible lead rated for this 
appliance. Follow the instructions supplied with the extension lead.

 

„

If using an extension lead, follow the instructions that came with your lead regarding 
maximum load while the cable is wound. If in doubt, ensure that the entire cable is 
unwound. Using a coiled extension lead will generate heat, which could melt the lead 
and cause a fire.

 

„

Double insulated  :The charger used by this product requires no earth connection as 

SAFETY INSTRUCTIONS

Summary of Contents for ACIW124





















Reviews: