background image

7

OPERATION INSTRUCTIONS

battery pack water or rain. Battery short circuit can lead to current

increases, overheating, burning or even breakdown.

Tools and battery packs shall not be stored where the temperature

is likely to reach or exceed 50°C(122.F).

Even if the battery pack has been severely damaged or completely

depleted, and can not be burned. The battery pack will explode in

the fire.

Pay attention to the battery pack do not fall, vibration, collision

battery, when the hammer and so on.

Keep the maximum battery life expectation!

To charge the battery pack before it is fully discharged. When the

machine is found to be insufficient, be sure to stop the machine

and charge the battery pack. Do not charge the battery pack again.

Excessive charging will shorten battery life.

To the indoor temperature of 10°C -40°C (50.F-104.F) under the

conditions of the battery pack. Charge the battery pack in the hot

state before charging to recharge.

Charging instructions

Charging, indicating that the red light is always on. (When the

battery pack is used up, plug the charger, turn on the green light,

indicating overheating protection, then wait for the battery pack to

cool before charging.

Full of electricity, indicating that the green light is always bright.

In the charging process, (such as the indicator light does not shine,

flashing lights and other abnormalities, please do not intermittent

charge, immediately sent to professional personnel for

maintenance.

Summary of Contents for ACRW106











Reviews: