ATTENTION
TECHNICAL SPECIFICATIONS
1. The product only can be used on DC 12V power source and it can’t be
used directly on AC 110V, AC 220V, DC 24V, DC 36V.
2. Avoid over-inflating, never exceed the recommended pressure. Items
over inflated may burst and cause serious injury. Allow device to cool
for 10 minutes after 15 minutes of continuous operation.
3. The unit will become hot during use and we recommend to wear
protective gloves when operation. Use caution when touching the
unit. Only cautiously hold the unit by the carry handle and allow the
unit to cool enough before storing.
WARNING
Make sure the vehicle has safely stopped
,
then start the
engine.
Before plugging power cord into the cigarette lighter
socket of the car, please check whether the car’s maximum
current reaches 20 amps. If lower than 20 amps, DO NOT use
a cigarette lighter to supply power to inflate, avoiding short
circuit of the car, please use the special battery clamps instead!
Voltage
DC 12V
Rating Power
220W
Max Flow
46L/min
Max Display Pressure
150 PSI
Max Current
18A
Power cord
2.8m
Air hose
0.65m
LED
300 LUM
2
Summary of Contents for AHCAP068
Page 10: ......
