5
Configuring the Software with a Standalone Transfer Manager
176
3. (Option) If you want to generate a low-res MPEG-1 proxy after playback transfer
completes, click the “
Generate local MPEG-1 proxy after playback transfer
completes?
” check box. Otherwise, leave it unchecked.
n
MPEG-1 proxies are for local playback on the AirSpeed Multi Stream only.
c
Under heavy loads, generating proxies while ingesting or playing out can inhibit system
performance. Therefore, it is recommended to not generate proxies while recording or
playing out.
4. (Option) If you want to begin delete at a specific metric based on time, click the “
Begin
delete
” check box, and type a percentage in the field for each option that you want to
specify deletion parameters.
Media will delete starting with the oldest clips first.
5. (Option) If you want to delete all inventory daily, select the “
Delete all inventory daily
at (24 hour HH:MM)
” check box, and enter a time when you want to delete your
inventory in hour and minute (HH:MM) format.
6. Click
Apply
.
7. Close the AirSpeed Multi Stream Service Configuration dialog box.
Next, you must launch Transfer Manager if it is not already running. For more information
on launching Transfer Manager, see
“Starting the Interplay Transfer Engine on the Avid
(Option) Installing the AirSpeed Multi Stream Device Service
If your site uses Avid iNEWS Command to control AirSpeed Multi Stream channels for
capture or playout, you need to install the Interplay AirSpeed Multi Stream Device Service
on the AirSpeed Multi Stream server. The AirSpeed Multi Stream Device Service (located
on the Command CD) needs to be installed on the AirSpeed Multi Stream server that is
being controlled by either Command.
To install AirSpeed Multi Stream Device Service on the AirSpeed Multi Stream server:
1. Locate your Avid iNEWS Command CD, or navigate to somewhere on your network
where it is located.
2. Navigate to the Avid_Framework_Workstation folder in the installation location for
your site.
3. Double-click the
AvidAirSpeedMultiStreamDeviceService.exe
to launch the installer.
A splash screen appears, followed by a Welcome dialog box.
Summary of Contents for AirSpeed Multi Stream
