3
Configuring the Software
108
6. Select Avid Inventory Manager.
The right panel displays information as shown in the following screen.
7. Do the following:
a.
Verify that AirSpeed Multi Stream is listed as a device.
b.
Verify that there is inventory. The count (# of objects) will be listed.
c.
Verify that the Available field displays “true”.
For more information on changing device settings, and adding devices, see “Channel
Settings” in Chapter 3 of the
Avid iNEWS Command Administrator’s Guide
.
8. Start the Avid iNEWS Command Workstation.
9. Select Tools > System Settings.
10. Create a Device Channel for each channel (and each AirSpeed Multi Stream) by
selecting Channel > Device Channels. When creating a device channel for AirSpeed
Multi Stream, make sure that you do the following:
a.
Set the Channel name (use a letter such as A, B, or C).
b.
Make sure the Device Name is the AirSpeed Multi Stream hostname.
c.
Select AirSpeed Multi Stream as the Device Type.
Summary of Contents for AirSpeed series
