Chapter 6: Nuendo
25
New Features in Nuendo 5
PAN
The Pan knobset now provides access to Nuendo 5’s new Surround Controls: Speaker Solo, Surround Panner modes, and Rotation
controls.
Quick Controls
Quick Controls for the selected track are now accessible from the surface.
MC Control
1
From top level knobset, press
PAGE =>
.
2
Press the
QC
knobtop.
Each of the selected track’s eight Quick Controls are displayed and can be adjusted with the encoders.
MC Mix
Press and hold the
EQ
knobset selector until it blinks and then release.
Each of the selected track’s eight Quick Controls are displayed and can be adjusted with the encoders.
VSTi Controls
VSTi parameters are now accessible from the surface for Synth and Instrument tracks. They can be changed using CFG mode on
instrument tracks.
MC Control
1
Select an instrument track.
2
From the top level knobset, press
PAGE =>
.
3
Press the
VSTi
knobtop.
Parameters for the instrument on the selected track are displayed and can be adjusted with the encoders.
MC Mix
1
Select an instrument track.
2
Press and hold the
INSERTS
knobset selector until it blinks, then release.
Parameters for the instrument on the selected track are displayed and can be adjusted with the encoders.
MIX and GROUP Knobsets
The MIX and GROUP knobsets now access Nuendo 5’s Direct Routing features.
1
Select a track.
2
Press the
MIX
knobset selector.
Selected routing is displayed in the top-left knobcell.
• The
SEL
key toggles between summing mode and intercancel.
• The
ON
button enables the routing destination.
3
Press the top-left knobtop to display routing selections.
4
Press a knobtop to select the desired destination.
Summary of Contents for EUCON
