53
To create a disk configuration floppy disk from the Windows NT
system:
1. Acquire a blank formatted floppy disk.
2. Click the Start button, point to Programs, point to Administrative
Tools, and then select Disk Administrator.
The Disk Administrator window opens.
3. Place the formatted floppy disk in the system.
4. From the Partition menu, choose Configuration, and then choose
Save from the submenu.
The Insert Disk dialog box appears.
5. Click OK.
The stripe set disk configuration is placed on the floppy disk so
you can transfer it to the Windows 2000 system.
6. Write down the following information about the drive that
contains the Windows NT operating system for later use:
-
Disk number — for example, 0
-
Drive letter — for example, C
-
Partition size — for example, 2047 MB
7. Close the Disk Administrator window.
