Chapter 2: Installing the MADI Card
9
Confirming MADI Card Installation
After you have updated the software and installed the MADI
card(s) in your FOH Rack or Mix Rack, confirm that you have
properly installed it.
To confirm MADI card installation:
1
Power up your VENUE system, making sure that all amps or
speakers connected to your system are muted or turned off.
2
In VENUE, go to the
Options > Devices
page.
3
When successfully installed, the MADI card is auto-detected
and shown on the Options > Devices page in the following
ways, depending on your system configuration:
• In systems that include an FOH Rack, the MADI card con-
nected to the first Mix Engine card appears as
MADI 1
, and
the card connected to the second Mix Engine card ap-
pears as
MADI 2
.
• In systems that include a Mix Rack, the MADI card con-
nected to the first Mix Engine card appears as
MADI 1
, and
the card connected to the second Mix Engine card ap-
pears as
MADI 2.
When you power up your MADI-equipped VENUE system,
all MADI card outputs are muted until full system initial-
ization is complete. All MADI outputs are also muted dur-
ing the system shutdown procedure
.
MADI card indicated in the FOH Rack icon in the Devices page
Two MADI cards indicated in the FOH Rack icon in the Devices page
MADI card indicated in the Mix Rack icon in the Devices page
MADI 1
MADI 2