VENUE MADI Card
6
5
On the back panel, locate the expansion slots. If you are in-
stalling one card, or the first of two cards, remove the top ex-
pansion slot cover by removing the two screws that secure it
to the rack.
6
Remove the MADI card from its packing material. Hold the
card by its edges.
7
Gently slide the card into the expansion slot. Make sure it is
oriented right-side up.
8
Secure the card to the back of the Mix Rack using the screws
that secured the expansion slot cover.
9
From the front of the rack, reach inside and secure the card
to the chassis of the rack by tightening the captive thumb-
screws.
10
Inside the rack, locate an available power cable. If the
power cable is attached to the chassis with zip ties, cut the zip
ties. Be careful not to cut the wires.
Back of the Mix Rack
MADI card showing bracket and connectors
Expansion
slot covers
Mounting bracket
Power connector
Ribbon Cable connector
Installing the MADI card in the Mix Rack
Tightening the captive thumbscrew
Cutting the power cable zip tie